You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5670 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Thursday, November 6th 2008, 3:07pm

by Wet_Boots

Quoted from "Plano80"

rough estimate would be from the edge of my house to where I need to water to is about, width 5 to 5.5 feet. Length which is not a problem is about 80 feet. I would like to water from the edge of my house outward if possible. thanks
Try SST nozzles in a head-to-head spacing. Hunter makes them, among others, and they cover a 5x30 area. There are also left-hand and right-hand corner pattern with 5x15 coverage. You might want to use high-pop heads, in order to get a bit more throw for the 5-and-a-half-foot width.

Wednesday, November 5th 2008, 11:14pm

by Plano80

rough estimate would be from the edge of my house to where I need to water to is about, width 5 to 5.5 feet. Length which is not a problem is about 80 feet. I would like to water from the edge of my house outward if possible. thanks

Wednesday, November 5th 2008, 10:34pm

by Lowvolumejeff

Strip sprayers to the rescue

Hi. Your problem is one we encounter regularly.

To give you the best answer, some dimensions would be helpful.

That said, check out the various strip sprayer heads. Other options include triagular spacing using low angle 1/2 & 1/4 plastic or brass heads. Best choice depends on your area to be watered.

Hope these suggestions point you in the right direction. If you need more help, post the dimensions of the area to be covered, and you will get some other ideas.

Jeff

Wednesday, November 5th 2008, 7:47pm

by Plano80

Spray head to use on side of house

I am trying to find the best spray head to use on the side of my house(between my house and house next to me) so it doesn't spray too much on the yard next to me. I have tried using 1/4 and 1/2 spray heads but could not reduce the flow enough. I have also tried a square pattern. That seems my best bet but are there any other spray heads I could use for this. thanks