Thanks Mitch. Now both zones (1 & 6) are blowing fuses still. Last night after I discovered zone 1 was still blowing fuses, I ran 1 minute test run on zones 2 -6. They all worked, today when I went to run 2-6, 6 blew a fuse...again. Ughh..was hoping to at least figure this out before I start tearing it out next spring. I don't have alot of cash to dump into it now. I appreciate the feedback...
Thanks Mitch, I live in NE, just reseeded a couple of weeks ago so wanting to keep the ground good and moist, the new grass is coming in well.
Hi all, I have a six station Toro system using the crap Pro Flo valves, which will all be replaced next spring. Two zones started to blow fuses, zones 1 & 6. The new solenoids I ordered have two wires, the old ones are the Tee Tops that have three wires. Initially when I replaced the solenoid and the diaphragm on zone 1, I wired it the same as the Tee Top solenoids, the positive wire and one common wire to one of the wires on the new solenoid and the other common wire to the other wire on the ne...