Quoted from "Wet_Boots" the point is to RTFM and understand what the controller can and can't accomplish - it doesn't matter what you want, if what you want is outside of the controller's capabilities and a word to the wise, and everyone else - programming a system so that it runs when you can observe it is not good policy - let it run in the wee hours of the morning, with the best supply pressure and the least wind - you can always check the zones now and again, without altering any programs i...
Quoted from "Wet_Boots" Better get out the owners manual and go over the programming step by step. You might even learn how you could have left well enough alone and still have been able to check operation. Amazing, the owners manual, I surely hadn't thought of that one before posting. Did you even READ the original post? I wanted MY controller customized to MY liking, so as far as "how you could have left well enough alone", I hope you (or somebody on this forum) has some actual advice instead...
Okay, first post, here it goes: I did not install this system, it was present when my wife and I bought our home in December 2011. That being said, I just had a landscaper out and everything was working fine until I decided to change the run time from the default 7:00AM to 7:00PM so I could verify the system was working properly. I have two (valves I think), one in the front yard next to my hose bib, and one in the back yard next to another hose bib (both have electrical wires attached to them)....