I took the 3 valves apart, cleaned them blew them out with an air hose, put them back together. STILL LEAKING! Any ideas as to what to do next?
Thanks, Hi.Todd. The valve that would not come on is bad. Checked it with a meter. Current coming to the valve when the valve should be activated but valve not working. I checked the valves that were leaking. Apparently, there is some trash in them. I can activate the zone with the solenoid by turning it and cut it off by tightening it but all 3 are still leaking.
I cut my system on yesterday. 3 of the 4 valves were leaking. the controller cut them on and off o.k. but they are still leaking. The 4th valve was not leaking but would not cut on.
I turned my water pump and control box on yesterday. 3 of the 4 valves are leaking whether the timer is on or not. The only one that is not leaking will not come on at all. Any suggestions from anyone?
