Can you recommend a MP-rotator? Also, does it fit a 1/2" nipple?? <blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by mrsafety2</i> <br />Thanks HOOKOO....... I will let you know how it goes and if I will be having a used sprinkler head sale.... <blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by HooKooDooKu</i...
Thanks HOOKOO....... I will let you know how it goes and if I will be having a used sprinkler head sale.... <blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by HooKooDooKu</i> <br />[Edit - Short Answer] Friction losses in the 1/2" poly and garden hose are killing your pressure. [/Edit - Original Long Answer] We need specs on your heads to make accurate calculations. But here's some estimates I come up ...
I have completed my install. I have 7 zones and testing all of them before I bury all of my lines. I am using a 50 and 100 foot garden hose to test each zone seperately. I have 5 heads per zone and they are not reaching full spray. Will this change when I hook it up to the main water supply?? I have 70 psi at the hose bib and 16 gpm. I used 1/2 poly with rainbird full pop ups.
Quoted <i>Originally posted by DOORZ</i> <br />There are too many factors for a simple answer, pressure, GPM, etc. Pressure is 70 psi, GPM is about 18.
How many heads are in a zone, just an average?
