but i want to know if it is wise and acceptable to put spray sprinklers in the middle in the line or to put them on the side which is not good option cuz the place ist wider than a max distance of sprinkler...it is 19,6 ft wide
here is my sketch (static pressure 5 bar and 16 GPM)...after couple of hints i decided to put in the front of my house which is 42ft wide and 36 long 4 pgj or pgp ultras in two zones (for the case of some ,,correction´´ of the irrigation system and putting more sprinklers if needed)...but now i need your opinions how to solve my section on the side and in the back of house...I want to put in the middle PS ultras ...i dont care if there is half meter no coverage cuz its not in the center...the ba...
did you try against deers to put some human hairs on a tree or just hang them somewhere?
ok...just want to ask because I was confused...in some tutorials they said that there has to be head to head coverage and other says that there can be only 4 heads in corners....so the final solution is to put 4 pgp ultras (or pgj´s) in the corners and make two section...I have other questions but i will make new topic...thx a lot
I just want to know if it will be enough to put 4 pgp´s or pgj´s in the corner and maybe other 2 on the wide side...I dont care about pressure issues because I think it will be enough...my garden is not so large... should it be like this?..blue are sprinklers http://2i.sk/9aee1c36e5
hi...whats the better sprinkler spacing?...my first zone is about 36ft long and 42ft wide...my design is in the picture...my pressure is 5bars and 16gpm..i want to place 4 90 degree hunter pgj with distance 32ft and on the side two with distance 20ft...should I place also on the other side two with 16ft or is it OK?..i want to avoid to place one in the middle of garden....my second desing is the same but with 6 pgj´s with distance 20ft and 2 with 16 feet...and what sprinkler is better in this ca...
