Search results
Search results 1-10 of 10.
Does anyone know how I might be able to locate where a pipe is going without digging, I found another pipe for another zone while installing a controller on my system, and put pressure and water to that pipe and get nothing coming out of the ground anywhere, the pump does not even kick on. Dont feel like digging for it but if i habe to i will just trying to find an easier way if there is one.
C&l landscape does some irrigation work, and they have been around for a long time and there are alot of companies that have been around a long time i just cant think of the name right now.
I am not sure what you mean by pigtail, but yes this is an outdoor timer and this timer plugs into a socket and I imagine it could be hardwired into the pump or house but I figured why go through all that mess when there is a plug right there from previous owner and I know that plug works.
I have a buddy that gave me an Irritrol controler and have gone to lowes and bought a rainbird 3 manifold valve sytem, I currently have a manual 3 zone system and want an automatic system which is why my buddy gave me the controller. My quesstion is this i have 3 power wires coming out of the controller green white and black and they were wired into a 3 prong plug but they are no longer wired together, the only colored wire on the plug is green and the other 2 are not colored. Which wire goes wh...
The pump goes on and off by the pressure switch and is regulated by the pressure in the bladder tank. I Dont know that much about the well because it was here when i got here, how would i tell if there is a backflow device and what exactly does it do. I think it is a shallow well and proboaly could be a little deeper, but has not given me any problems.
the system is already working and irrigates what i want it to irrigate. I just manaully have to turn on each zone, since I have now aquired a controler from my buddy I was just trying to figure out how to wire the controller to the valves, I am not building a rocket and dont need to pay someone to wire 3 valves to a box, as far as heads and placement and stuff It works now and is now getting my grass wet which is better than nothing at all which is what I started with, it is not a profesional jo...
I dont think I need a relay just some valves and some wire // there is a relay on the pump already // I have 2 pumps one pickimg up from the well to the tank and the other pumps from the tank to the house. Irriagation is piped in between the 2 pumps so i could shut it down all together if i needed to.
A buddy gave me a new control box for my house I dont know anything about these at all except they control different zones at different times. The controller is called a rain dial and is an indoor unit, it looks pretty nice to me, but I dont know for sure. I currently have a manual system now that has 3 seperate valves, I traced all lines and replaced all the heads I could find from previous owner. Everything works great except but i would like to have more zones but I need A bigger pump for tha...
no it wont turn at all ///// i dont see a main valvle there are 3 valves out in the yard right by the pump and it appears, there was a line going to them straight from the pump but however it was cut off by someome //// i was thinking if i cut those valves and blew out those lines with water i could find the heads or at least find out where they go// what do you think
I bought this house about a year ago and it appears it is set up with a Toro El6+ it is an old house so i can imagine the system is old also. I know nothing about irrigation systems and would love to get it working espicially with the lack of rain we have had around here, We live in Florda. Can anyone help me out with trying to figure out if the system i have is worth saving or would it be better to buy a new one and start over.
