I found an additional 4 valves in my yard. I have one more to find. They were covered with grass not allowing me to see them. I am going to try to find the solenoid that it needs. It is a weathermatic valve. I beleive it needs a M24E solenoid with water preasure 150psi, 24V, 50/60HZ. That is what I saw on the solenoid itself. The one I bought didn't fit so I assume I have to buy this specific one. I don't believe Home Depot carries these solenoids. Any ideas as to where I could find them?
No. This section does not turn on when I turn on another section that does work. It only turned on because I manually opened the valve. I did this to the other three valves and other sections that don't come on with the timer went on as well. I'm going to replace one solenoid and see if it fixes the problem in the back yard. If so I will attempt to change the other solenoids. Around the wires is this white creamy stuff. Might someone know what that is called? It's in the wire connectors?
I have a 9 Zone Irritrol Kwikdial system. 3 out the 9 zones are working. When I attempt to manually turn each zone on I get a fuse message on the timer. I have four Valves that I could find in my yard. When I went to the valve and turned the lever one of the zones that does not turn on with the timer turned on. Would this be a solenoid problem? Do I need to replace all the solenoids since the zones are not all connected to the one I turned on? I believe the valve is a weather matic but I am not ...
