I have checked the wiring and the wiring is tight. Still no luck. The following is how the sensor is hooked up to the controller. Tell me if this is right or wrong. I am not in the bypass mode. sen= blue wire sem= white wire rem= nothing hooked up ac1= yellow wire ac2= yellow wire grd= green There is an orange wire hooked up to nothing. My terminals in the comptroller is from the top to the bottom in the sequence listed above
I had a wireless rain-clik rain sensor installed, last December, it worked until March. The red light comes on indicating that the system should not come on. But, the system does come on. Can anyone give me some help on how to rectify this problem.