Thats my very next step. Didn't do it the first time because the leak and water were obvious.
I had a weathermatic 12 station controller that kept on blowing the fuse. I thought I traced the issue to a valve manifold that sprouted a leak getting all the wires wet(submerged) cleaned everything and dried it out. Plugged the transformer in and the fuse blew immediately and the controller seems like the board around the fuse connection is dark. Could I still have a short back at the control valve mannifold? Before I replace the controller with a new one how can I test to make sure I dont blo...
System is weathermatic vave and controller 9 zones. Recently cut by contractor. Spliced together 13 lead wire but, one zone always comes on power or no power any thoughts?