My current set-up is as follows... - I have 1" poly going from jet pump in well to a "T" connector - From one end of the "T" it is 1" to the bladder tank - From the other end of the "T" it is 3/4" to the yard (all under ground - patio and driveway) Can I take turn the 3/4" to 1" and maintain the appropriate pressure? I can also change the switch on my bladder tank from 30/50 to 40/60...
Im planning to install an irrigation system and need some information regarding pressure and filtration. I will be running the system off a well and bladder tank. The tank is currently set-up with a 30/50 switch (pump turns on at 30 PSI and off at 50 PSI). The water feed is ¾ polly. Im planning to use Rain Bird 5000 Series Rotors and 1800 Series Spray Heads. To complicate things, I have some sediment (I think rust) issues which cause clogging with my portal sprinklers. That said, Im planning...
