Thanks, I will replace the nozzles. On the valve, I added some Rectorseal, tightened it a bit more and the leak stopped. I also found that I was adjusting the wrong area for the arc and, once I figured this out, the length of spray is much better. I still need to work on the spray arc on the spray heads!
I just installed a new hunter sprinkler system and one of the valves is leaking where it screws onto the manifold. I understand that you do not want to overtighten this but it leaks no matter what I do with it. Also, I am having a difficult time adjusting my rotor and spray heads. Some of the rotors are just spraying too far, I was hoping I could adjust them down to the 15ft. I have the 2.0 flow rate nozzles in, would the 1.5 cut the distance down? In a few words, can you explain how to adjust t...
