Quoted from "Wet_Boots" test the wiring for resistance - just because you 'felt' voltage does not mean you have good continuity I actually used the voltage meter to check. It looked like current was flowing well.
Hello, I have 9 spray zones and 3 zones do not work using the control panel. I can turn on the sprinklers manually by flipping the lever by the valve. I decided to swap out the solenoids - Weathermatic S20P solenoids... and made sure wires were getting electricity. Shocked myself several times while doing this. Once solenoids were swapped out, only 1 of the 3 zones is operational using the control panel. I'm stumped. What should I try next? Thanks in advance. John