You are not logged in.

Search results

Search results 1-3 of 3.

Monday, September 20th 2010, 9:18am

Author: chris1802

Converting hunter I20's for mp3000's

I have alot of puddling around a few heads and water is coming out of where the body meets the rotor. I have tried to tighten them but I can neve stop it. Do I need new rotors or a new body or both. I fought with one for 45 min yesterday but cound only get it down to a small leak.Thanks!

Friday, September 17th 2010, 8:10am

Author: chris1802

Converting hunter I20's for mp3000's

My lawn is in the sun all day. I guess i should let them run every day. I have a well and am I worried about taxing the pump.Too late now but I will adjust my schedule.However I still feel the rotors aren't covering well.Do you have any opimions about the mp3000's? Thanks!

Friday, September 17th 2010, 7:30am

Author: chris1802

Converting hunter I20's for mp3000's

Hi, I live in NJ and have sandy soil which is rock hard due . My current 10 zone system is using Hunter I20 6" rotors. I currently water 35 min per zone every other day. This was a very dry summer and I guess that was not enough because my lawn is dead(except for the crbgrass) The rotors are throwing about 28' .I have 5 heads per zone doing 360 except for the 2 end ones. My front lawn is 130 x 42. I have 3 zones in the area about 22' apart. 2 are on the main lawn and the 3rd is on a small strip ...