Quoted from "Mitchgo" you don't have to replace the entire thing.. You can just replace the shut off handle .. preferably try to find a watts #1 shut off valve. awesome! thanks!
Quoted from "reduck" As for the broken pipe or heads, all my zones act the same. It appears that I lost considerable line pressure. I have the well guy coming over to investigate as I believe the water pressure dropped everywhere including the house. I will update after his visit. thanks, R pressure tank bladder ruptured. that was the house/sprinkler pressure drop. the watts bpd will be replaced to fix that crack issue... thanks for the advise!
Quoted from "Mitchgo" Is the crack on the side of the ball valve handle? If it is then it's because it's a ball valve. As your turning the ball, the opening inside allows the water to hit the crack, as it's fully turned on- the ball opening isnt touching anymore. I see this happen all the time. Sounds to me that what ever zone that the heads weren't popping up has a broken pipe and or broken sprinkler head.. Walk around the zone and look for a break It is on the back of the ball valve so you ar...
system is about 7 yrs old. On a well. watts wa100m4 fr BPD. it has been working ok since start up in April. Sunday, I noticed some of the heads weren't popping up. At the same time the wife noticed a huge drop in water pressure at the sink. Turned irrigation off and sink pressure came back. Went to look into it today and noticed a little drippage at the BPD. So I shut off the house side valve to inspect the bonnet and poppet. Seemed ok. So I cranked it back on. Just as I reached full pressure I ...
