I have the controller that does not have the sensor leads. It connects between the common of the pumps and common of the controller. I am going to see if I can figure out which wires to splice together and see if it works. I will report back. Thanks.
Ok, my dog decided to chew up the wiring to my rain sensor right where it goes into the ground and back to the valves. Now, the system will not come on at all and I need to get it fixed. My system is a Rainbird and I have the EC controller that the rain sensor must be wired between the common wire and the valves common lead. Texas Water Works installed the systems, but they do not offer any level of service or repair. I have only gotten one person on the phone in over three months and he told me...
