What is a good time of the day to start watering and for how long should I run each zone in NJ?
I am installing my system myself and ran my wire along my main and into each valve box. My question is, should I strip a section of the outer jacket off in each box a cut the white wire in each box which is my common? Do I then twist the 2 pieces of my white wire together along with 1 of the 2 valve wires after I strip them back?
I have about 30 feet to run indoors. So I can use tan pipe? What about Pex?
how could i find out what my codes are here in New Jersey?
I was going to use sch 40 1" PVC instead of copper from the meter area to the PVB...is that OK or do i have to run copper?
I measured the pressure on the hose bib and I believe it was 45-50 lbs. never did a flow test
1" Wilkins pressure vacuum breaker... Will I have enough pressure for the system with a 3/4 source?
Hi...I am installing a sprinkler system in my yard and have a question with the water supply. I have installed 1" PVC main and zone pipes in the ground and are running approx 5 long range sprayers per zone and approx 4 zones. My house is on a slab (no basement) and I have a 1" feed line from the street to where it comes through the house foundation. The black 1" pipe from the street sticks up approx 6 inches out of the slab then is reduced to a 3/4 copper pipe where it comes through the drywall ...