Hey guys,
Long time i haven't been on the forum. Lots of nice changes since i've been here last. Anyway, lately been having issues with my irrigation. The pump just sounds off as usual and i'm getting what seems to be good pressure but it never starts up any of the zones even in 'manual' mode anymore (i start the pump manually from the relay as a test and turn on one valve manually as well). Zone 1 and Zone 2, nothing comes out of any sprinkler heads. However, zone 3 shows promise and almost lifts the heads of the sprinklers but still no sprinklers popping up properly. I was thinking of flushing the system from the pump to valve box, then try flushing each zone individually. Any ideas on what you guys would try first to get this working again. I have faith you guys will help me out as usual. Thanks