Hi all,
Moved into a property where the previous owner either self installed their system or had a "budget" installer do the work. For the most part I am satisfied, but there is a mish-mash of impact heads, pop-up heads and rotor heads. They all seem to be doing the job ok, just seems odd to me.
I am having issues with one zone not properly watering some odd shaped areas of lawn that are broken up by concrete walk-ways. Attached is a drawing of the zone in question and how it interacts with the overlapping zone. Zone 2 isn't fully documented here, I just wanted to illustrate the overlap. The spray distance isn't quite to scale, but should get the point across. Please help me find the best way to cover the two small areas of grass that are now trying to be covered by the pop-ups. I'm willing to swap heads and branch off of the existing line. I'd really like to avoid having to run another circuit to that area as it is on the opposite side of the house and lot from the controller and manifold. If it can't be done without another circuit, I'll probably add some more rock hardscape that won't need watering.
If it can be done without watering the sidewalk that runs through the middle that would be great. However I am not completely against it being watered if I had to go with rotors and run that zone longer.
Thanks for any insight!