You are not logged in.

mrfixit

Moderator

Posts: 1,508

Location: USA

11

Saturday, May 19th 2012, 1:22pm

Call a different company. They obviously don't know what they're doing.

12

Monday, May 21st 2012, 8:27am

I'll agree with mrfixit.

Sounds like they may have cut or not reconnected the common wire.
They should be able to figure that out quickly.

GaryR

Starting Member

13

Tuesday, November 28th 2023, 10:58am

Flow rate

Hi all. New to the forum. I’m beginning the design of my irrigation system and I need to know the flow rate of my 3/4” pex line where I’ll be tapping into for my system. There is no place to cut into to get a temporary valve to check flow rate with a bucket and timer as it’s in the meter pit and I’ll need to get a plumber to install the connection for my system. The house is a brand new build in a new subdivision and pressure and flow is great, just can’t conveniently measure it. Wondering if anyone with a 3/4” feed off the meter knows what their GPM is which could give me an idea of what to expect for design purposes? Thank you!

mrfixit

Moderator

Posts: 1,508

Location: USA

14

Tuesday, November 28th 2023, 1:13pm

Maybe you can measure gallons per minute by reading the water meter.
Maybe have the plumber install the connection first then measure then design.

Rate this thread