Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Rain bird ESP-6TM Controller
I have Rainbird ESP-6TM Controller. I had PR OFF issues to the controller last week but that was resolved and everything started to work.Manual and auto cycles all worked fine
Now, the controller receives power but the Sprinkler heads don't popout with water either in Manual Advance mode or in auto mode. In auto mode, the timer goes to zone 1, the count down begins but the heads don't pop out. Same story in Manual Advance.
Any ideas? Thanks.
Check and make sure your common wire is still connected. I am assuming you replaced either a fuse or the transformer on your previous problem. If this is the case you may have accidently disconnected the common wire.
Josh
Irrigation /Landscape Lighting / Pump and Well Specialist
I didn't have to replace the fuse or the transformer. Just removing them and putting them back somehow did the trick (didn't really find out why I had the PR OFF message in the first place). I did remove the transformer out and reconnect the wires.
What is the common wire?
Thanks.
The common wire is usually the white one connected to the "com" terminal. This is often the source for most wiring problems when all vales or zones are affected.
Josh
Irrigation /Landscape Lighting / Pump and Well Specialist