Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
How to Connect 3/4" Valve to Manifold 3/4"
How do I connect the 4 port manifold to a 3/4 inch valve (075-DV)?
Can I use a reducing nipple on the inlet side?
Also what is the correct way to connect the outlet side? Can I just use a standard reducing adapter (MiPT x Insert)or do I need to use some combination of the manifold fittings.
BTW. I'm using 3/4" poly pipe.
Thanks
Spears. It has swivels on the 4 ports and a male nipple on the end.
I've never seen a Spears manifold before. Personally I'd never use a pre-made manifold. I'm obsessed with my work not leaking and working on the first attempt. Call me anal. I did find your manifold online however. Just use pvc fittings. Their suggestion to use a female adapter on one end is a bad idea. Especially on a main line. Female adapters have a tendency to crack or leak if not tightened just so. That's reason enough for me to build the manifold myself.
Good luck!
--
http://209.134.136.184/acb/showdetl.cfm?&DID=30&Product_ID=1077&CATID=7
If I can't fix it, it's broken!
it doesnt look very strong or it wont last long?
Jimmy
Texas Lic. Irrigator
Landscape Irrigation Auditing & Management
Texas Lic. Backflow Tester
it doesnt look very strong or it wont last long?
Jimmy
Texas Lic. Irrigator
Landscape Irrigation Auditing & Management
Texas Lic. Backflow Tester
The Spears manifold is really intended for use with male-thread valves.
Jimmy, It's basically a personal preference. I can name a variety of reasons why I don't like pre-made manifolds. I'm not sure you want to hear them all. What I've found to be my some of my best tools being an irrigation tech are, observaton and anticipation. I will name one reason why I don't like that Spears manifold. It doesn't matter that I've never seen one in person. Look at all the unions. Each one has the possibility of leaking someday. Much more than a simple male adapter screwed into the inlet port. I also think Boots is right.
If I can't fix it, it's broken!
it makes sense, besides i wouldn't want the repair call to go with it.
Jimmy
Texas Lic. Irrigator
Landscape Irrigation Auditing & Management
Texas Lic. Backflow Tester