Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
o ring is slipping out at pump housing when pump shuts off
When the pump turns off there appears to be a tremendous back pressure that bumps the o ring out of its seat in the pump housing. Water spurts out for 6 seconds . Then the pump can't push water on the next start up untill I replace the oring back into its track.I have a 2 HP pool pump and a lake . I have plenty of pressure and flow. I designed the pump part of this system (first time doing so) so it may have some obvious errors.
Is there some kind of devise to absorb this backpressure before the next circuit turns on.
Does my pump have too much flow? Should I run several circuits at one time. It has an output of 80 GP
We can't see your pump setup from here. Maybe some photos would help.