You are not logged in.

Toro Super 700 Rotor Adjustment NOT adjusting

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Len B

Starting Member

Posts: 1

1

Friday, June 25th 2010, 4:40am

Toro Super 700 Rotor Adjustment NOT adjusting

I have an 18 yo system that is all Toro and uses mostly the Super700
rotors and need to change some of the arcs. I have only been unable to
change the arc setting on ONE of them. They are ALL part circle (red pin
under nozzle), I have unlocked the head and have followed the steps for
adjusting the arc. I know the technique works since I was able to
change 1 out of the 20+ heads I have. Has this been a problem with the
old Super 700 heads? Is there a way to correct this short of replacing
the heads or "using a six pound sledge hammer" as has been suggested by
some genius on this board? Is there a way to disassemble the rotor to
access the rachet mechanism (short of the the hammer technique
mentioned)?

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Friday, June 25th 2010, 6:35am

buy another head already

Similar threads

Rate this thread