You are not logged in.

Zone is always on unless the zone is set to "on" at the controller?

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

GoingCrazy

Unregistered

1

Friday, May 23rd 2014, 9:09pm

Zone is always on unless the zone is set to "on" at the controller?

I am so confused. ?( I replaced one of the sprinkler valves with a new solenoid. The issue now is the zone is always ON. But, if the timer turns the zone ON the water shuts off. Seems like it is operating in reverse! I switched the wires to another zone just to see if that channel is bad, but get the same results. Of course I have to manually shut the valve off till I find out what is wrong. Any help would be great.

mrfixit

Moderator

Posts: 1,510

Location: USA

2

Saturday, May 24th 2014, 3:41am

DC latching solenoids do that. Are you working with a battery operated valve? If so, take the solenoid back off. Reverse the plunger. If it's pushed in, pull it out. If it's out, push it in. See if that helps.
---
I came back to say, make sure the solenoid plunger is pulled out. That's the off position. Then screw the solenoid back on.

This post has been edited 1 times, last edit by "mrfixit" (May 24th 2014, 4:48am)

Similar threads

Rate this thread