You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

John M

Starting Member

1

Monday, June 7th 2021, 7:55pm

Pump won't run

Hi, New member. I'm not an electrician but I can wire simple stuff. I had power into the top of my Batrow PSR 123 Pump Start Relay. No power coming out to the pump. There is a little "breaker button" on the relay and when I pushed it the pump would run. I assumed that the relay was defective so I replaced it with a new one today. Same result. Power in, None out. Breaker button runs the pump.

Any ideas where I go next?

Thanks for any help.

John

Wet_Boots

Supreme Member

Posts: 5,381

Location: Metro NYC

2

Tuesday, June 15th 2021, 12:13pm

What controller are you using? It happens that the Batrow pump relay has a fairly heavy current requirement, and some controllers might not be compatible with it. If you could exchange it for an Irritrol SR-1 relay, your problems might be solved.

Similar threads

Rate this thread