You are not logged in.

Zone stay on and Controller is off

Pulpwood

Unregistered

1

Saturday, August 2nd 2008, 7:49pm

Zone stay on and Controller is off

The only way I can turn the zone off is the shut off the water. I have a Hunter 600i controller and hunter srv valve. How do I get the zone to shut off.

mrfixit

Moderator

Posts: 1,510

Location: USA

2

Saturday, August 2nd 2008, 9:50pm

wont shut off

If disconnecting the wire from that zone doesn't shut off the valve then the problem is at the valve. Take the top half of the valve off and see what's going on inside. Look for debris and see if there's something wrong with the diaphragm.

This post has been edited 1 times, last edit by "mrfixit" (Aug 3rd 2008, 12:27am)

Lowvolumejeff

Advanced Member

Posts: 91

Location: Seattle Area

3

Saturday, August 2nd 2008, 9:54pm

Debrie

I agree. I am amazed that small pebbles and sand gets into our systems and cause valve problems. So common in areas with new consruction, that I place brass strainers on all new installations.

Frustrating problem, Hope you get it fixed.

Or, if you don't find anything inside the valve, rplacing the diaphram and solenoid has also worked for me. BUT, try the Mr.FixIt suggestion first.

Jeff

pulpwoodpcP

Unregistered

4

Sunday, August 3rd 2008, 8:27pm

Quoted from "Pulpwood"

The only way I can turn the zone off is the shut off the water. I have a Hunter 600i controller and hunter srv valve. How do I get the zone to shut off.
Clean the valve it now shuts off thanks

Similar threads

Rate this thread