You are not logged in.

Pressure

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

ruslkauf515

Starting Member

Posts: 1

1

Sunday, May 31st 2009, 10:13pm

Pressure

It seems that I get less pressure at the sprinkler at the end of zone--farthest from control valves--leaving an area with less water distribution. How can I be sure of equal pressure at all sprinkler heads? ?(

ruslkauf515

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Monday, June 1st 2009, 5:46am

If you have rotor heads, change nozzles to redistribute water.

HooKooDooKu

Supreme Member

Posts: 683

3

Monday, June 1st 2009, 8:52am

While I'm not so sure about rotors, if you have spray bodies and a little extra working pressure, you can get spray bodies with 30psi pressure regulators built into them. This was my solution for a system that starts with about 70psi static water pressure using MPRotators.

Similar threads

Rate this thread