Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Wiring valves / timer / pump
Hello all. I am extending my existing irrigation system to my back half acre lot. I currently have 2 zones that the valves are manual. I will add an additional 2 zones for a total of 4, and the valves will be automatic.
I have a different setup than the norm. I have a 220 volt pump with a sand point that supplies the water for my irrigating. I purchased the Orbit brand 1 1/2" automatic valves. I am somewhat lost when it comes to wiring this all up together. I realize I need a timer, but I'm thinking the timer is only going to open and close the valves. Do I need a 2nd timer to tell the pump to kick on and off? And I need to communicate between 24v and 220v. I'm assuming I need a contacter relay for that.
Any help would be much appreciated.
a pump relay will control the pump by way of the timer's master valve terminal.