You are not logged in.

Toro rain switch

mcyr

Starting Member

Posts: 1

Location: Canada

1

Wednesday, July 16th 2003, 10:55am

Toro rain switch

Hello,

I have a Toro system (Greenkeeper/ECX controller) with a Toro rain switch. The switch seems to work fine; it does shut off the system when watering the rain sensor.

The problem is that the controller is stuck in this "no watering mode" and I can't water any more (the "water droplet" icon never dissapears on the controller) even after a few sunny days where the switch should have time to dry.

Any tips ? (I have heard of close/open circuit installation configuration)

Thanks,
Martin.

RVLI

Supreme Member

Posts: 462

Location: USA

2

Wednesday, July 16th 2003, 1:23pm

Yep. I used to have a Toro Greenkeeper. The day I put a sensor on it it was sunny as could be, I turned the sensor switch to "on" and that little droplet came on. I wired the sensor directly to the wiring and now it works fine.



Edited by - rvli on Jul 17 2003 6:03:06 PM

Rays Sprinklers

Supreme Member

Posts: 493

Location: USA

3

Thursday, July 17th 2003, 6:20am

I guess you should folloow what RVLI said because i have no experience with TORO controllers

Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers
Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers

Rays Sprinklers

Supreme Member

Posts: 493

Location: USA

4

Friday, July 18th 2003, 6:42pm

I guess you should folloow what RVLI said because i have no experience with TORO controllers

Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers
Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers
Rate this thread