You are not logged in.

1

Wednesday, May 12th 2010, 10:25am

Rain Bird Valve Identification Please

Hello,



Recently took over maintenance on a few apartment complex units. I have about 30 of these 2" valves but most of them have bad solenoids.



They are a 2" Globe style. I know they are discontinued from Rain bird, but is there any cross reference for the solenoids on these things?





Thanks in advance.

kosterirrigation

Senior Member

Posts: 21

Location: NC

2

Thursday, February 3rd 2011, 8:24am

A little late on the reply, but this is a Rainbird EP200F valve

Around the era of the EV series valves the EP was the light commerical valve prior to the introduction of the PGA series valve.



Good luck finding parts.

Central Irrigation

Supreme Member

Posts: 364

Location: Central Minnesota

3

Thursday, February 3rd 2011, 3:18pm

I've got about two of those in the service van. I suppose if I combined all the parts I could get one to work. If you end up swapping it with a different valve, make sure and save it. Those parts are not common, up here anyway.

kosterirrigation

Senior Member

Posts: 21

Location: NC

5

Friday, March 25th 2011, 9:40pm

Thanks

Thanks for the Help.

I ended up putting the R Co replacements after much research on the internet.

Thanks Again. I plan on switching them out this season.

Rate this thread