You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

soggysandwich

Unregistered

1

Wednesday, June 30th 2010, 9:00pm

low pressure

I recently bought a house and it has a rainbird irrigation system. All the zones work great, except 1 zone, no pressure. I thought it was a valve issue so I replaced it, but still the same. Found 1 sprinkler that was busted, fixed it and got a little better. Then I noticed all the other zones have about 5 sprinklers and the one I am having issues with has 13 pop up sprayers. Basicaly they pop up half way and has some spray but also pushing water out around the base of the shaft, if I pull them up all the way the base of the shaft doesn't leak. Except the sprinklers furthest away from the valve, they barely have any pressure. I am wondering if there are just too many sprinkler heads. I am new to irrigation systems so any info would be appreciated, thanks.

mrfixit

Moderator

Posts: 1,510

Location: USA

2

Wednesday, June 30th 2010, 11:40pm

It's possible you have too many heads. It's possible you just need to replace the sprinklers or the seals. Try this, turn off all the sprinklers with a screwdriver. Pull them up so they seal. Look for flooding. Could be a broken pipe or riser that you're not seeing.

Rate this thread