You are not logged in.

Hunter Pro-C Controller

Les

Starting Member

Posts: 1

1

Wednesday, March 9th 2011, 11:31am

Hunter Pro-C Controller

Have had the system turned off for the winter and when turned on for first time this week, the first 4 zones worked perfectly but the 5th and 6th zones never came on. The timing for each zone was duplicated on the controller so I believe that phase of the programming is ok. What would be the recommendation for a novice "fix-it" man?

hi.todd

Supreme Member

Posts: 417

Location: Houston, Texas

2

Wednesday, March 9th 2011, 8:11pm

are the 2 set of zones working and nonworking on separate modules? If they are you may have a loose module on the controller. Idea 2, there could be cut wires or a cut common wire to the back yard, or from one group of valves to the next valve.

Start with that and let us know.

:thumbsup: :thumbsup: :thumbsup:
:thumbup: :thumbsup:

Similar threads

Rate this thread