You are not logged in.

HELP WITH SPRINKLER VALVE

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

EDDIEJR9

Starting Member

Posts: 1

1

Friday, April 29th 2011, 6:15pm

HELP WITH SPRINKLER VALVE

My sprinkler valve will not come on. I think I tried everything. I changed the solenoid on a rain bird valve, I removed the old wiring, I bought a new control. I have four station an none of them come on. what is the next step.....
Do I have to change all valves, why all the valve will go out at the same time. 8| 8| 8| 8| 8| 8| :wacko: :wacko: :wacko: :wacko: :wacko:

mrfixit

Moderator

Posts: 1,510

Location: USA

2

Friday, April 29th 2011, 6:26pm

Ground wire might be loose or broken.

Water is shut off to the system.

See if the fuse if blown.

Does the controller have power from the outlet or hardwire?

Yes it's possible you have four bad diaphragms.

hi.todd

Supreme Member

Posts: 417

Location: Houston, Texas

3

Friday, April 29th 2011, 6:27pm

Check your backflow device.
Check your Rain Sensor wire, (IF IT IS CUT, YOUR SYSTEM IS DEAD)
Don't Panic!
It will be O.K.

:thumbup: :thumbup: :thumbup: :thumbup:
:thumbup: :thumbsup:

Similar threads

Rate this thread