Dog ate my valve
I have a irrigation system with the valves buried in the ground. I have a new puppy that dug up the box an ate the wiring from the valve. Before he did this, the sprinkler worked fine. I replaced the valve, but do not know how to connect it.
I have two wires from the valve, a black wire in the ground that is not connect to anything, two white wires that are connected to each other, and a 7 strand wire that run thru the area but does not connect to anything. When I turn on the sprinkler, zone 1 starts but only a sprinkler head, and its very low amount of water. I checked the water pressure and its fine. I think its a wiring issue, but not sure how to wire it. I connect 1 wire from the valve to the white wires and 1 wire from the valve to the black wire. No luck.
Any thoughts?