RADIUS ADJUSTMENT SCREW PGP - Just Chat - SPRINKLER TALK FORUM - You Got Questions, We've Got Answers

You are not logged in.

RADIUS ADJUSTMENT SCREW PGP

Reply

Starting Member

Friday, June 24th 2011, 4:32pm

RADIUS ADJUSTMENT SCREW PGP

I just turned the radius adjustment screw on my PGP rotor too far. Water is pouring out. How do I replace it?

... I'm writing this later. Luckily I found the little screw lying beside the rotor. I had some extra nozzles. I replaced the nozzle that had blown out and then forced the screw through the tiny hole in the top. All is well again!

This post has been edited 1 times, last edit by "brucecarson" (Jun 24th 2011, 7:54pm)

Go to the top of the page
Quote

Supreme Member

Location: Metro NYC

Friday, June 24th 2011, 6:12pm

buy a new head

Go to the top of the page
Quote

Reply

Similar threads

- Sprinklers - Rotors, Sprays, & Nozzles »
- PGP Rotor arc no longer adjustable (Jun 21st 2011, 12:08pm)
- Sprinklers - Rotors, Sprays, & Nozzles »
- How to read sprinkler specs? (Jun 19th 2011, 5:57pm)
- Sprinklers - Rotors and Spray Heads »
- PGP nozzles (Aug 11th 2008, 8:30am)
- Design Issues »
- Rotor angle vs precipitation rate (Jun 6th 2007, 8:29pm)
- Sprinklers - Rotors and Spray Heads »
- Nelsons 6000 heads (May 9th 2005, 9:57am)