You are not logged in.

RADIUS ADJUSTMENT SCREW PGP

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

brucecarson

Starting Member

Posts: 1

1

Friday, June 24th 2011, 4:32pm

RADIUS ADJUSTMENT SCREW PGP

I just turned the radius adjustment screw on my PGP rotor too far. Water is pouring out. How do I replace it?

... I'm writing this later. Luckily I found the little screw lying beside the rotor. I had some extra nozzles. I replaced the nozzle that had blown out and then forced the screw through the tiny hole in the top. All is well again!

This post has been edited 1 times, last edit by "brucecarson" (Jun 24th 2011, 7:54pm)

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Friday, June 24th 2011, 6:12pm

buy a new head

Similar threads

Rate this thread