You are not logged in.

1 station not watering on Hunter ICC

luv2bean

Starting Member

Posts: 1

1

Monday, July 11th 2011, 7:06pm

1 station not watering on Hunter ICC

Have Hunter ICC 8 station system and 1 station is not coming on at all. Not when system is ran or when individual station is ran either. Any ideals?

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Monday, July 11th 2011, 7:30pm

Broken wire or failed valve.

servicetechMA

Advanced Member

Posts: 63

3

Monday, July 18th 2011, 7:18pm

yup, try putting the zone wire from say zone 5 into zone 6 in the clock,probably not the problem,most likely just a solenoid,hopfully not a cut wire though.
if you get an autoranging multimeter this will tell you everything you could ever need to know 99% of the time,wheather its the clock not getting voltage,not sending voltage,partial wire connection,open line or cut wire,bad solenoid. pretty much everything.

Similar threads

Rate this thread