You are not logged in.

Suggestions for 10' x 150' strip of grass

Buster10

Unregistered

1

Monday, April 8th 2013, 10:01pm

Suggestions for 10' x 150' strip of grass

Our neighborhood entrance has one lane entering and one exiting that gives us a ten foot wide by 130 long strip of grass surrounded by asphalt. We installed hunter sprays every 12 feet and used 6 foot spray heads to keep from watering the street. Obvious mistake we have dry areas between the heads. I also notice the sprays do not give very even coverage.

Any suggestions in a spray head to purchase to give more even coverage of entire strip of grass? It is ok if we spray onto asphalt. Would MP rotators work better. They are expensive but if best choice we will purchase. Thanks.

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Tuesday, April 9th 2013, 7:39am

Are you saying you installed a line of full-circle heads down the middle of the strip?

Buster10

Unregistered

3

Tuesday, April 9th 2013, 3:53pm

Yep, that is what I did.

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

4

Tuesday, April 9th 2013, 10:26pm

Down the center is no good. You use half-circle heads along the curb, on both edges of the strip.

Similar threads

Rate this thread