You are not logged in.

Good Valve with Male X Barb Fittings?

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

jeffguay

Active Member

Posts: 6

1

Saturday, April 17th 2004, 4:15pm

Good Valve with Male X Barb Fittings?

I bought a house with a system allready installed. The valves were sticking open or not opening at all. I have had luck with the Hunter HPVs so I bought some to install. When I dug up my valve boxes I noticed the previous installer used the manifold tees and the installed Toro valves had male threads on the inlets and a hose barbs for the outlets. I hate the valve, but love this configuration. Any recommendations for a good quality valve setup like this. It is quite a time saver.
Thanks,
Jeff

aquamatic

Advanced Member

Posts: 230

Location: USA

2

Sunday, April 18th 2004, 1:46pm

Hunter PGV's come that way if you choose.
Rate this thread