You are not logged in.

Turning off a head

krah1

Starting Member

Posts: 1

1

Wednesday, July 21st 2004, 8:05am

Turning off a head

I have a hunter pgp's that was installed recently. I would like to disable one head and don't know what to do other than turn a whole zone off. Please let me know what I can do (some sort of adjustment to lock the head down or disable the nozzle or what) please be detailed as I have little experience with sprinkler systems. thanks you very much

aquamatic

Advanced Member

Posts: 230

Location: USA

2

Thursday, July 22nd 2004, 3:57am

You need to get a rack of low angle nozzles. One of the nozzles is a blank which you can then insert into the PGP. I still wonder why the blank does not come with a blank on the included rack.

aquamatic

Advanced Member

Posts: 230

Location: USA

3

Thursday, July 22nd 2004, 3:57am

You need to get a rack of low angle nozzles. One of the nozzles is a blank which you can then insert into the PGP. I still wonder why the blank does not come with a blank on the included rack.

radical

Active Member

Posts: 31

Location: USA

4

Monday, July 26th 2004, 4:24pm

You could do what aquamatic suggested or just dig up the head and screw a threaded plug/cap onto or into the fitting the head was screwed into.
Richard Kersten

S&R Sprinkler Systems and Landscaping, Inc.
Destin, Florida
Rate this thread