Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Attention: The last reply to this post was 5457 days ago. The thread may already be out of date. Please consider creating a new thread.
Tuesday, May 19th 2009, 8:21am
by Wet_Boots
Monday, May 18th 2009, 8:29am
by WakeUpMaggy
Ok Ok, yes I have one in my cart already.
Ebay is just so easy because of PayPal, but I see that the seller didn't yet accept my lowball offer, so best price is still here.
I just hope I can get those cruddy screws out one last time. It's deep in the corner, a tiny screwdriver has to blindly be jammed in tight, then a wrench used to painstakingly turn each screw. A Sawzall is a grave temptation on that valve.
Thanks Again!
The nice folks that run this site also sell the Irritrol 205
http://www.sprinklerwarehouse.com/Irritrol-205-Series-Valves-p/205tf.htm
Tuesday, April 28th 2009, 4:53am
by WakeUpMaggy
The nice folks that run this site also sell the Irritrol 205
http://www.sprinklerwarehouse.com/Irritrol-205-Series-Valves-p/205tf.htm
Tuesday, April 28th 2009, 2:54am
by Wet_Boots
Monday, April 27th 2009, 6:53pm
by WakeUpMaggy
Your grey valve is a Richdel R-204, or one of its descendents. Easily repaired, or just swap the guts with an Irritrol 205
Monday, April 27th 2009, 5:41pm
by Wet_Boots
Sunday, April 26th 2009, 8:32pm
by WakeUpMaggy
I assumed you already had the 3/4-inch Hardie valves ("small Hardie valves") ~ the larger sizes were never price-competitive.
Skip the slip valves for now. Threaded valves will allow you to undo a mistake. PVC unions might help you fit the manifolds in. On the outlet side, you may have more digging to do.
By the way, your first choice (Toro Ez-Flo) is basically the same thing as the Irritrol jar-top. Same manufacturer. Same repair parts.
Sunday, April 26th 2009, 6:17pm
by Wet_Boots
Sunday, April 26th 2009, 10:12am
by WakeUpMaggy
Sunday, April 26th 2009, 8:20am
by Wet_Boots