Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Attention: The last reply to this post was 4611 days ago. The thread may already be out of date. Please consider creating a new thread.
Sunday, September 11th 2011, 10:15pm
by Wet_Boots
Sunday, September 11th 2011, 7:09pm
by pedro.tx
Big Thanks and follow-up....so flow is coming thru, and I have erratic performance. allow me to explain:You could have messed up the common wire while replacing those valves
That's an old watts 709 back flow assembly
The gate valves could have broken or you didn't turn them on all the way?
turn them both down until it's taught- then all the way back up- lefty loosey righty tighty- should be at least 5 or 6 revolutions both ways.
You can open up the test ports ( Try all 4) to ensure you have water flowing through the device if you have a small stubby screw driver and a strong hand.
Saturday, August 20th 2011, 7:16pm
by Mitchgo
Saturday, August 20th 2011, 6:45pm
by Wet_Boots
Saturday, August 20th 2011, 6:34pm
by pedro.tx
Sight unseen, i would recommend Irritrol 2500F valves, Physically strong, and eternally repairable.
Tuesday, August 16th 2011, 8:21am
by Wet_Boots
Monday, August 15th 2011, 9:51pm
by pedro.tx
Monday, August 15th 2011, 2:20pm
by mrfixit
Sunday, August 14th 2011, 2:06pm
by pedro.tx