Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4741 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information

Username

Subject

Message

Settings

Convert URLs

Automatically converts internet addresses into links by adding [url] and [/url] around them.

Enable smileys in this message

Smiley code in your message such as :) is automatically displayed as image.

Enable BBCode in this message

You can use BBCode to format your message, if this option is enabled.

Security measure

Security code

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, May 18th 2011, 9:20am

by HooKooDooKu

I would say Yes, because the precipitation rate for all MP Rotators are pretty close regardless of the pressure.

(See Nozzle Performance @ http://www.hunterindustries.com/products/mprotator)

The precipitation rate (with square spacing) for most MP Rotators is 0.39"/hr at 40psi, and 0.43 at 30psi.

Go to the top of the page

Tuesday, May 17th 2011, 4:09pm

by mike_44012

Hunter MP Rotators

Can I use 30PRS heads and 40PRS heads on the same zone with Hunter MP Rotators?

Go to the top of the page