SPRINKLER TALK FORUM - You Got Questions, We've Got Answers »
Help with Troubleshooting / Service / Repair »
Valves & Wiring »
Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Monday, May 14th 2007, 2:06pm
The Irrigation Specialist Mfg' Az.
Please check my website and you'll find what I do and the unique tools I make and market.
Real timesavers, especially the Suck-Tube and Krik-It.
http://www.tismaz.com
Please check my website and you'll find what I do and the unique tools I make and market.
Real timesavers, especially the Suck-Tube and Krik-It.
http://www.tismaz.com
Monday, May 14th 2007, 2:06pm
The Irrigation Specialist Mfg' Az.
Please check my website and you'll find what I do and the unique tools I make and market.
Real timesavers, especially the Suck-Tube and Krik-It.
http://www.tismaz.com
Please check my website and you'll find what I do and the unique tools I make and market.
Real timesavers, especially the Suck-Tube and Krik-It.
http://www.tismaz.com
Wednesday, May 20th 2009, 2:09pm
RE: common wire connection and master wire connection
Time to get an ohm meter and use resistance measurements to help you figure out which wire is which.
Next time, you will do a better job of labeling the wires before you disconnect them.
Next time, you will do a better job of labeling the wires before you disconnect them.
On my Irri-Trol Double Dial 12 controller which I am trying to reconnect, I do not have any wires connected to the COM or MAS connection. If I connect a wire to the COM, station #1 comes on regardless of which station the dial is turned to. Any guidance you can give on this will be appreciated.
Thank you,
Ginny
