You are not logged in.

End of line drain

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

tdunc

Unregistered

1

Wednesday, June 11th 2008, 7:29pm

End of line drain

I posted this in another area a couple days ago and received no replies yet ...

How is the HP1500 end-of-line drain installed? I have 1/2" poly tubing, clamped end for now - until I install the drain. The drain has two connections - one is barbed and the other is threaded. Do I connect the barbed end into my tubing and cap off the threaded opening? Does it matter how the drain is oriented (wicking pad up or down)?

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Wednesday, June 11th 2008, 8:59pm

Maybe no one here is using them. Ask the manufacturer, maybe.

mrfixit

Moderator

Posts: 1,520

Location: USA

3

Wednesday, June 11th 2008, 11:54pm

Drain

Here I looked it up for you. We don't use drains where I live. I've never seen one installed.

http://www.blazingproducts.com/products/drains/instructions.html
If I can't fix it, it's broken!

drpete

Moderator

Posts: 44

4

Friday, June 13th 2008, 12:44pm

Sorry i dint see your post till now. the drain you atre referring to is designed to be used where you slip te barbed end into your poly pipe and clamp it then screw your last rotor onto the threads so the drain is facing down.

i use them and they work good.

tdunc

Unregistered

5

Saturday, June 14th 2008, 11:35am

AHA! I see! Thank you both!

Similar threads

Rate this thread