Can't adjust the arc on my Hunter PGPs

subopt

New Member

Posts: 7

Friday, September 24th 2010, 5:16pm

Can't adjust the arc on my Hunter PGPs

I have the special key and followed the instructions (i.e. hold at right stop and turn key clockwise to increase arc). Nothing happens. I tried turning it CCW and again, nothing happens. I got the same result with all 5 of my PGPs. The instructions say when you hit the limit (either min or max arc) the sprinkler will sputter, but I didn't see this either. Although not what I needed, I was able to adjust the flow rate. Any ideas? Thanks

Go to the top of the page
Quote

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

Saturday, September 25th 2010, 7:26am

Make sure you are using the correct cover slot - some folks have inserted the key in the lifting slot, and that gets you nowhere.

Go to the top of the page
Quote

subopt

New Member

Posts: 7

Saturday, September 25th 2010, 1:31pm

User error -- I was using the wrong end of the tool. Gotta use the plastic end. Next time I'll read the instructions. http://www.hunterindustries.com/support/installation_adjustment/rotors/pgpinstruct.html