Hello,
I didn't shut the water off to my sprinkler system in time last winter and we got an early freeze and I got a crack in my PVB and one of the nearby pipes (the downstream pipe).
Anyway, I am racking my brain getting started. My setup looks almost exactly the same as this guys:
Conbraco 1" PVB (see pictures)
There is a crack in the PVB casing, so repairing the internals isn't going to work. Need to replace the entire thing. This is what I am thinking of ordering to replace it:
http://www.sprinklerwarehouse.com/Conbraco-Backflow-Pressure-Vacuum-Breaker-p/cdc4a-505-02f.htm
Which should work. My only problem is, how the heck do I get the old one off? I went out with some wrenches and thought it would be fairly easy but I can't figure out what to unscrew. Then I started researching, and have seen some people sawing off the piping which seems to be what I have to do.
There are two valves on the PVB. Does only one of these typically screw in, and the other needs to be welded on? If that is correct, does it matter which one gets threaded?
Slightly confused!!! Thanks for any help.